Image

Hai this is dail and search iam going to explain Fridge repair.Today we are going  to show you how to change the water inlet valve kit in your refrigerator. Pretty  easy job, you need a quarter inch nut driver and a sharp utility knife. Let me  show you how it’s done.your first step is to gain access to the interior of the  control housing next remove the thermostat control kno release the old thermostat  from the housing along with the temperature sensing tube taking note of their  position disconnect the wires you’re now ready to install the new temperature  control thermostat first straighten out the sensing tube and if applicable  transfer the insulator from the old sensing tube to the new one connect the wires  insert the new thermostat into place and conform the sensing tube to fit the  housing replace the thermostat knob reposition and secure the control  housing.you’re now ready to plug the appliance back in to make sure it’s  functioning properly.Readmore

 

www.dialandsearch.com

Advertisements